- Part number : BMC9650-0328
3V Waterproof SMD Magnetic Buzzer,Black 9.6mm small SMD Transducer
Quick Detail:
- Size: L9.6mm*W9.6*H5.0mm
- Rated Voltage: 3VDC
- Operating Voltage: 2-5VDC
- Rated Current: Max. 30mA at 3VDC (Min. Operating Current: 15mA)
- SPL: Min.80dB at 10cm Input 3VDC
- Resonant Frequency: 2800+/-300Hz Continuous
Specification:
1.Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric pressure: 860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure.
| 1 | Rated Voltage | 3 VDC |
| 2 | Operating Voltage | 2? 5 VDC |
| 3 | Rated Current | Max.30mA ,at 3VDC |
| 4 | Sound Output at 10cm | Min. 80dB,at 3VDC,10cm |
| 5 | Resonant Frequency | 2800±300 Hz |
| 6 | Tone | Continuous |
| 7 | Operating Temperature | -20 - + 70℃ |
| 8 | Storage Temperature | -30 - +85℃ |
| 9 | RoHS | Yes |
| 10 | Weight | Approx 1 g |
*Housing Material: Black Noryl
3,Reliability Test After any following tests the part shall meet specifications without any degradation in appearance and performance except SPL. SPL shall not deviate more than -10 dB from the initial value
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage Resonant frequency, 1/2 duty Square wave.
2 High Temperature Test The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
3.Low Temperature Test The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
4.Humidity Test Temperature:+40℃±3℃ Relative Humidity:90%～95% Duration: 48 hours and expose to room temperature for 6 hours
5.Temperature Shock Test Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle) Total cycle: 10 cycles
6.Drop Test Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick, three sides, six plain.)
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes Note: As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it. | |
